NCCR BOILERMAKER TRUE EXAM/68 QUESTIONS
AND ANSWERS/A+ RATED
Which organization requires a person to be trained in order to operate
personal lifting equipment - -OSHA
-Where would the usage of a RTJ Gasket be found - -High pressure system
-All of the following are examples of internal manway hardware except - -
Slide fastener
-What type of wrench measures how much a fastener is being tightened - -
Torque
-the fitting that makes it easy to disassemble threaded piping is - -Union
-what is the purpose of a gasket - -to create a seal between 2 stationary
parts
-What is the 1
st consideration when making a gasket - -Material compatibility
-In order to get the bundle to line up with the shell side gasket the best tool
to use to lift the bundle is a - -Drift pin
-How often should you inspect any type of rigging device - -before each use
-ring gaskets may be affected by all of the following except - -number of
bolts
-CHAIN slings should be visually inspected - -annually
-which way should the teeth face on a hack saw blade - -away from the
handle
-to prevent injury due to crushing between crane sand other objects what
must be used - -barricades
-which is true when comparing head pressure if a 1" pipe and a 10" pipe
when both are 20' tall - -the pressure is the same
-when making a threaded connection the fitting stops on the 2
nd thread the next step is - -stop something is wrong
, -when using a sealing ring on a heat exchanger what material is used to seal
off in between the floating tube sheet
and test ring - -permatex
-for duct sections bolted together there is usually some kind of seal or - -
gasket
-the end of a tube in an exchanger has been smashed, this is caused by all
of the following except - -the partition plate being too short
-which of the following should be removed when pressure testing the vessel
- -relief valve
-what components are attached to the baffle on an exchanger tube bundle -
-tie rods
-all of the following are safety hazards associated with vessel confined space
except - -improper inspection
-the department that governs standard workplace safety procedures - -osha
-valves used to relieve pressure in a pipeline, tank, vessel are called - -
safety valve
-What tool can be used to generate force making the loosening or tightening
easier - -impact
-Washers are used to prevent fasteners from marrying? - -surface
-where are title blocks typically located on a drawing - -lower right
-the following threaded fittings require a thread lubricant except - -
compression nut
-asbestos can be found in all of the following except - -Rubber
-taps are used to - -cut interior threaded
-chain hoist are primarily used for what type of lifting - -vertical lifting
-when turning off an oxyfuel torch what valve must be turned off first - -
acetylene
-what does SWL represent - -safe working load
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Victorious23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.93. You're not tied to anything after your purchase.