ASNT STUDY GUIDE: Industrial
Radiography Radiation Safety
A cobalt source has decayed from its original activity after 3 half-lives. Originally it was 88 Ci
(3256 GBq) - correct answer-11 Ci (407 Gbq)
A COBALT SOURCE OF &# Ci is exposed for a full 60 min. Assume a 14.0 R/Ci factor,
shooting through a 3 half-value collimator. What would the restricted area be on the cold or
collimated side of the collimator? - correct answer-253 ft (77.44 m)
A control panel in an X-ray system must have clearly visible which of the following
statements? - correct answer-caution: X-rays produced when energized
A declared pregnant radiographer or assistant may receive no more than_______for the
entire pregnancy. - correct answer-500 mR (5000 uSv)
A direct reading ionization chamber, such as a dosimeter, has the advantage of providing an
- correct answer-immediate dose history since last time charged
A dosimeter must be capable of reading a range of - correct answer-0-200 mR (0-2 mSv)
A film badge/TLD records what? - correct answer-total dose history for the period worn
A high radiation area is defined as "an area accessible to individuals, in which they could
receive - correct answer-100 mR/h (1000 uSv/h)
A member of the public or unmonitored individual is allowed to receive up to, but not to
exceed: - correct answer-2 mR/h, 100 mR/year (20 uSv/h, 1000 uSv/year)
A monitored person may receive up to 5000 mR (50 000 uSv) per year. What would be
considered an excessive amount of radiation exposure to that Individual? - correct
answer-any unnecessary exposure to radiation
A non-declared pregnant radiographer or assistant may receive n more than: - correct
answer-5 R per year (50 mSv)
A radiation area is defined as "an area accessible to individuals, in which they could receive
- correct answer-5 mR/h (50 uSv/h)
A radiographer and assistant are standing in a 2 mR/h (20 uSv/h) field. What would the
assistant's total dose be after 4 h? - correct answer-8.0 mR (80 uSv)
A radiographer is receiving 100 mR (1000 uSv) at the crank assembly. The crank assembly
is 25 ft (7.62 m) in length. Where would the "RADIATION AREA" sign be posted? - correct
answer-111.8 ft (34.08 m)
, A radiographer is receiving 100 mR/h (1000 uSv/h) at the crank assembly. The crank
assembly is 25 ft (7.62 m) in length. How long will it take for the radiographer to receive a
total dose of 50 mR (500 uSv)? - correct answer-30 min
A radiographer reads 7.5 on the 10x scale of the survey meter. What is the current dose rate
at that position? - correct answer-75 mR/h
A radiographer's survey meter is showing 0 near the source; it can safely be assumed that -
correct answer-the meter is in an inoperable state; the radiographer should retreat from the
source until an operational meter has replaced the suspect meter
A restricted area is defined as an area - correct answer-to which access is restricted for the
purpose of controlling radiation exposure
A sealed source emits what? - correct answer-gamma rays
A shipping container is surveyed and found to be 3 mR/h at 39.37 in. (30 uSv/h at 1 m).
What label would be required? - correct answer-Yellow III
A source is being transported with a surface reading of 25 mR and 3 mR at 39.37 in. (250
uSv and 30 uSv at 1 m). Which transport label must be used? - correct answer-Yellow III
A source must be leaked tested - correct answer-every six months
A survey instrument must be capable of an accuracy of: - correct answer-plus/minus 20%
A survey meter must becapable of measuring a range of - correct answer-2 to 1000 mR/h
(0.02 to 10 mSv/h)
A thickness of 0.19 in. (4.83 mm) of lead will reduce the exposure of Ir-192 to one-half its
original intensity. This is known as the: - correct answer-half-value layer of lead for the
energies associated with Ir-192
A tube through which the radioactive source travels when inside a radiographic exposure
device is a/an - correct answer-S tube
A utilization log must include at a minimum - correct answer-make, model and serial number
of the exposure device
a White transport label maximum transport index is - correct answer-less than 0.5
A Yellow II transport label maximum transport index is: - correct answer-1
A Yellow III transport label maximum transport index is: - correct answer-more than 1, but
less than 10 measure at 39.37 in. (1 m)
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Hkane. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.42. You're not tied to anything after your purchase.