ASE A5 Brakes Study Guide (Hydraulic
Systems Diagnostics And Repair Section)
– Questions and Answers
Pascals Law - -1. Liquids cannot be compressed
2. When Pressure is applied to a liquid within a closed space, pressure is
applied to a liquid within a closed space, pressure is exerted in all directions
(pg10)
-The brake system used on cars up to 1966 - -The single circuit brake
system that operated the brakes in all four wheels with a single piston
master cylinder (pg11)
-Dual Brake System - -Divided the brake system in to two parts using two
pistons in the master cylinder for each circuit (Front to Back, or Diagonally)
(pg11-12)
-Diagonally Split System - -Provides braking power to one front wheel and
to the opposing rear wheel in the case of brake failure in a single circuit
(pg11-12)
-Compensating port (replenishing port) - -allow brake fluid to pass back and
forth from the revivor to each piston chamber (pg12)
-Residual pressure check valve - -Used to maintain slight pressure in the
brake lines and also used keep wheel cylinders pistons tight against their
bores to prevent air entry into the system (pg13)
-Low-drag caliper - -Designed to improve fuel efficiency by providing extra
clearance between the brake pad and the rotor (pg13-14)
-step-bore (quick take-up master cylinder) - -Utilizes a larger rear cylinder
bore and quick take up valve in order to provide a large volume of fluid at
low pressures (light pedal application) during the initial part of the pedal
stroke (pg14)
-Reservoir gasket - -Maintains an air tight seal on the master cylinder while
simultaneously allowing the reservoir to breath (pg14)
-Pedal height - -The distance between the pedal and the floor when the
brake are not applied (pg14)
-What may be the cause of incorrect pedal height? - -An Improperly
adjusted master cylinder pushrod (pg15)
, -What may be the cause of lower than specified pedal height? - -A bent or
misaligned pedal, worn pedal bushings, weak pedal return springs (pg14)
-Other things that may affect pedal height - -The stoplight or cruise control
switch adjustments.
May also cause brake drag. (pg14)
-Pedal reserve - -The max specified travel the pedal has before touching the
floor. (pg14)
-What may be the cause of a hard pedal on a vehicle equipped with a step-
bore? - -A restricted center orifice in the quick take-up valve (pg15)
-What may be the cause of a low pedal on a vehicle equipped with a step-
bore? - -A broken or weak check ball spring on quick take up valve. (pg15)
-Symptoms of a plugged quick take up valve - -The front right brake pads
experience premature wear on a front wheel drive car (pg15)
-Another possible cause for a low or spongy pedal - -Air trapped in the
hydraulic system (pg15)
-What must be adjusted after a power booster or pushrod is replaced - -The
pushrod (pg15)
-The possible cause of no brake pedal free-play or dragging brakes - -A
closed compensating port in the master cylinder (pg15)
-What can be the possible result of an over extended pushrod - -brake drag
(pg15-16)
-What can be the possible result of an under adjusted pushrod - -excessive
brake pedal travel (pg15-16)
-The two methods used to confirm the correct adjustment for proper
pushrod length and installation - -The gauge method and the air method
(pg16)
-What must be done to a master cylinder before installation - -It must be
bench bled in order to bleed out any air in the system. (pg16)
-What may be symptom of a bulging hose - -a spongy brake pedal (pg17)
-Why shouldn't brake hoses be clamped on modern vehicles - -Increases the
chances of damaging hose lining material (pg17)
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Victorious23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.77. You're not tied to anything after your purchase.