100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
Hearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% Correct £10.06   Add to cart

Exam (elaborations)

Hearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% Correct

 7 views  0 purchase
  • Module
  • Hearing aid dispenser
  • Institution
  • Hearing Aid Dispenser

Hearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispens...

[Show more]

Preview 3 out of 16  pages

  • August 29, 2024
  • 16
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • Hearing aid dispenser
  • Hearing aid dispenser
avatar-seller
Hearing Aid Dispenser: Mock Exam #4
Questions and Answers 100% Correct
If a patient comes into your office with an audiogram showing a PTA 10 dB AD and 50 dB AS
with a flat configuration and 2K 5 dB peak, sensorineural and reduced SDT scores you would be
looking at:
a. Hearing loss caused by loud noise
b. Hearing loss caused by birth
c. Hearing loss caused by otitis media
d. Hearing loss caused by Meniere's - ANSWER - d. Hearing loss caused by Meniere's


If a patient comes into your office with an audiogram showing a sensorineural PTA 50 dB AU
with a notch at 4 K and reduced SDT scores you would be looking at:
a. Hearing loss caused by loud noise
b. Hearing loss caused by birth
c. Hearing loss caused by otitis media
d. Hearing loss caused by central problem - ANSWER - a. Hearing loss caused by loud noise


When fitting a patient with a PTA greater than 70 dB the best type of mold would be:
a. Soft material with a long canal and no vent
b. Lucite material with a short canal and no vent
c. Soft material with a short canal and IROS vent
d. All of the above - ANSWER - a. Soft material with a long canal and no vent
BTE earmold used for normal hearing to 1000 Hz and a ski slope loss at 4000 Hz:
a. Lucite with a short canal and IROS "A" vent
b. Lucite with a long canal and reverse IROS "A"
c. Regular fitting with T-22 receiver
d. Soft with a long - ANSWER - a. Lucite with a short canal and IROS "A" vent


What is used in the good ear in a CROS fitting:

,a. Shell made of the soft material
b. Non-occluding made of hard lucite
c. Skeleton made of hard lucite
d. Non-occluding mold with short canal - ANSWER - d. Non-occluding mold with short canal


Which is used with high frequency loss;
a. Small pressure vent
b. Long canal
c. Small diameter sound channel
d. Large diameter sound channel - ANSWER - d. Large diameter sound channel


If you have an BTE with an HFA SSPL 90 of 117 dB, Frequency range of 140-5600 Hz and an
HFA FOG gain of 46 dB this would be for a:
a. Severe sensorineural loss
b. Severe HF sensorineural loss
c. Mild HF sensorineural loss
d. Moderate HG sensorineural loss - ANSWER - a. Severe sensorineural loss


Which earmold is used for a high frequency loss:
a. Shell made of soft material
b. Non-occluding made of hard lucite
c. Skeleton made of hard lucite
d. All of the above - ANSWER - b. Non-occluding made of hard lucite


Which is a non-occluding earmold:
a. Free Field
b. Receiver
c. Shell
d. Soft - ANSWER - a. Free Field

, What is the use for a Libby horn:
a. Give the patient only high frequencies.
b. Give the patient more power with high frequencies added
c. Give the patient only more power
d. Give the patient lower power - ANSWER - b. Give the patient more power with high
frequencies added


Placing an earmold in the ear canal will:
a. Enhance the natural ear canal resonance
b. Eliminate the natural ear canal resonance
c. Result in the "tin ear effect"
d. Enhance the "horn effect" - ANSWER - b. Eliminate the natural ear canal resonance


A longer canal on an earmold:
a. Enhances low frequencies
b. Enhances high frequencies
c. Used only on very long canals
d. Always comes with a small pressure vent - ANSWER - a. Enhances low frequencies


Which of the following is NOT an earmold acoustical difference option:
a. Tubing diameter
b. Interaural Attenuation
c. Bore diameter
d. Knowles acoustic damper - ANSWER - b. Interaural Attenuation


Which of the following is NOT a characteristic of a "high frequency mold':
a. Non-occluding
b. Long canal
c. Short canal
d. Large vent - ANSWER - b. Long canal

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller NursingTutor1. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for £10.06. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

73091 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now

Start selling
£10.06
  • (0)
  Add to cart