Electrical Theory 5th 1st Final Exam Questions With Solved Solutions.
6 views 0 purchase
Module
Electrical Theory
Institution
Electrical Theory
Which ITE tier site(s) is/are fault tolerant? - Answer Tier 4
When utility power is lost or a sever disturbance occurs, the UPS ___________ will shut down. - Answer Input section
In the ________ UPS the inverter is always on and connected to the output of the UPS. - Answer Line inter...
Electrical Theory 5th 1st Final Exam
Questions With Solved Solutions.
Which ITE tier site(s) is/are fault tolerant? - Answer Tier 4
When utility power is lost or a sever disturbance occurs, the UPS ___________ will shut down. - Answer
Input section
In the ________ UPS the inverter is always on and connected to the output of the UPS. - Answer Line
interactive
The easiest battery type to service is __________. - Answer Battery cartridge with internal lead acid
batteries
A _________ is an element of the electrical distribution system that at some point will cause downtime if
a means to by- pass it is not developed in the system. - Answer SPOF
Ground path continuity should be tested for _________ and any ground path utilizing a conduit raceway
as the conducting path must have all bolted or screwed connections checked and tested. - Answer Low
impedance
Large flooded cell battery installation will usually require extensive __________ and may require cell
changes which are a specialized function requiring training and certification. - Answer Preventative
maintenance
All isolation transformers have an inherent phase shift from primary to secondary of __________ which
when used in by-pass configuration would create a potentially disruptive phase conflict when the UPS
went to static by-pass. - Answer 30 degrees
PEM is a type of fuel cell. PEM stands for _________. - Answer Proton exchange membrane
, The byproduct(s) of fuel cells is/are __________. - Answer Water, heat and electricity
What are the two classifications for fuel cells that provide AC power as an output? - Answer Interactive
fuel cell system
What was the first type of automated control system used to control the indoor environment in a
commercial building? - Answer Pneumatic control system
_________ accepts a control signal and causes a mechanical motion. - Answer An actuator
A hydroelectric-generating plant uses __________ to generate electricity. - Answer Water flow
An overcurrent protective device prevents _________ from reaching excessively high temperatures, due
to high currents, by opening the circuit. - Answer Conductors or devices
__________ are caused by loads near the beginning of a power distribution system, incorrectly wired
transformer taps, and large loads being turned off. - Answer Voltage swells
What type of UPS system has high efficiency, small size, and is lower in cost than other types of UPS
systems - Answer Stand-by
________ is the intentional reduction of electrical power to a lamp in order to reduce its light output. -
Answer Dimming
Ballasts that are based on inductors are often called __________ ballasts because an inductor is a coil of
wire that creates a magnetic field, which resists changes in the current flow through the coil
. - Answer Magnetic
A(n) ____________ is an electric lamp that produces light by striking an electrical arc across tungsten
electrodes housed inside an arc tube. - Answer High intensity discharge lamp
_________ are the most common form of automatic lighting control used in buildings
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TestSolver9. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £8.15. You're not tied to anything after your purchase.
