Power Engineering 4th Development Of Boiler Design
Power Engineering 4th Development of Boiler Design
Exam (elaborations)
Power Engineering 4th Development of Boiler Design- Chapter 51 Test Bank Solution Manual Already Passed
2 views 0 purchase
Module
Power Engineering 4th Development of Boiler Design
Institution
Power Engineering 4th Development Of Boiler Design
Power Engineering 4th Development of Boiler Design- Chapter 51 Test Bank Solution Manual Already Passed
c - Answers 1. A straight tube longitudinal drum boiler with a chain grate stoker usually had:
a. One pass
b. Two passes
c. Three passes
d. Four passes
e. An internal furnace.
c - An...
Power Engineering 4th Development of Boiler Design
Power Engineering 4th Development of Boiler Design
Seller
Follow
TutorJosh
Reviews received
Content preview
Power Engineering 4th Development of Boiler Design- Chapter 51 Test Bank Solution Manual Already
Passed
c - Answers 1. A straight tube longitudinal drum boiler with a chain grate stoker usually had:
a. One pass
b. Two passes
c. Three passes
d. Four passes
e. An internal furnace.
c - Answers 2. The Haycock boiler was:
a. A watertube unit
b. Of multiple flue gas pass design
c. Used around 1720
d. Of welded construction
e. A packaged unit.
e - Answers 3. When hot combustion gases travel through boiler tubes which are surrounded by the
boiler water, the boiler is called a:
a. Watertube boiler
b. Tubular boiler
c. Packaged boiler
d. Coil type boiler
e. Firetube boiler.
a - Answers 4. A characteristic that made early boilers very inefficient was:
a. Lack of heating surface
b. An excess of flat surfaces
c. The internal furnace
d. Lack of good quality fuels
, e. Inadequate water treatment.
b - Answers 5. Boiler structural strength must:
a. Be at least ten times the normal working pressure rating
b. Be at least equal to the various code requirements
c. Take into account only pressure values and not consider temperatures
d. Be increased if thinner metal is to be used
e. Be verified by the purchaser.
e - Answers 6. A _____ is a water filled section which surrounds the firebox in locomotive boilers.
a. Crown sheet
b. Boiler drum
c. Tell tale stay
d. Steam dome
e. Water leg.
e - Answers 7. The steam space of a boiler consists of the:
a. Highest portion of the heating surface
b. Portion of the boiler below the water line
c. Inside area of the economiser
d. Inside area of the superheater tubes
e. Portion of the boiler not filled with water.
b - Answers 8. The first boiler to have an internal furnace was the:
a. HRT boiler
b. Scotch Boiler
c. Longitudinal drum firetube boiler
d. Locomotive boiler
e. Watertube boiler.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TutorJosh. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £6.99. You're not tied to anything after your purchase.
