Welding Final Exam Questions and Answers | Latest Version | 2024/2025 | Correct & Verified
4 views 0 purchase
Module
Welding
Institution
Welding
Welding Final Exam Questions and
Answers | Latest Version | 2024/2025 |
Correct & Verified
Why do welders sometimes stagger their weld beads?
To reduce heat concentration and minimize distortion in the workpiece.
What is the significance of "wetting" in a weld?
It ensures the molten met...
Welding Final Exam Questions and
Answers | Latest Version | 2024/2025 |
Correct & Verified
Why do welders sometimes stagger their weld beads?
✔✔To reduce heat concentration and minimize distortion in the workpiece.
What is the significance of "wetting" in a weld?
✔✔It ensures the molten metal flows smoothly into the joint for a strong bond.
Why are corners and edges prone to welding defects?
✔✔Because they cool quickly and may not achieve full fusion without proper technique.
What does "cold lap" mean in welding?
✔✔A defect where the weld metal fails to bond properly with the base metal.
Why do welders preheat thick sections of metal?
✔✔To allow even heat distribution and prevent cracking during cooling.
1
,What is a welding ripple?
✔✔The wave-like texture left on the surface of a weld bead.
How can a welder prevent crater cracks?
✔✔By tapering off the arc gradually and filling the crater at the weld's end.
Why is it critical to use the correct polarity in welding?
✔✔The wrong polarity can lead to poor penetration and an unstable arc.
What is the purpose of grinding a weld?
✔✔To remove imperfections, improve appearance, and prepare the surface for additional passes.
Why does interpass temperature matter in multi-pass welding?
✔✔To ensure consistent weld quality and prevent excessive stress between layers.
What does the term "arc blow" refer to?
2
, ✔✔A deflection of the welding arc caused by magnetic forces, often leading to poor weld
quality.
Why do some welders use back gouging?
✔✔To remove material from the root side of a joint for better penetration in the final pass.
What happens if the shielding gas flow rate is too high?
✔✔It can create turbulence, introducing air into the weld and causing porosity.
Why is overlapping considered a welding defect?
✔✔Because excess weld metal extends beyond the joint, weakening the overall structure.
What does it mean to "walk the cup" in TIG welding?
✔✔A technique where the welder uses the cup of the torch to guide the weld for precision.
Why is proper torch angle critical in welding?
✔✔To ensure even heat distribution and proper weld bead formation.
3
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller SterlingScores. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for £7.99. You're not tied to anything after your purchase.