Cladding - Study guides, Revision notes & Summaries

Which of the following is NOT included in a standard home inspection? A. screens, awnings, and shutters B. wall framing, if visible C. chimney D. roof drainage system - Ans: A. screens, awnings, and shutters Which of the following IS included in a typical site inspection? A. swimming pools B. docks C. awnings D. retaining walls - Ans: D. retaining walls When should a retaining wall be inspected? A. every retaining wall should be inspected B. if there's evidence of water flowin...

BICSI Installer 2 Technician exam Questions with elaborated answers 2024 1 - CORRECT ANSWER-KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The decrease in magnitude or the power loss of a signal that propagates between points, expressed in decibels (dB) as ...

Reinforcing Steel UPDATED ACTUAL Questions and CORRECT Answers what must be large enough and in the right places to accommodate building movement from earthquakes? - CORRECT ANSWER- A:Gaps or joints between cladding Why: The cladding on the outside of some buildings can sustain damage and even fall off if it does not allow the building to flex when the ground shakes. Precast concrete cladding, with or without stone facing, is heavy. The steel connections holding it to the building mus...

Building Tech. Quiz Latest Update with Verified Solutions What is the primary purpose of a building's structural framework? The primary purpose of a building's structural framework is to support the weight of the building and resist external forces such as wind and earthquakes. What materials are typically used for framing in residential construction? Common materials used for framing in residential construction include wood, steel, and concrete. What is the significance of ene...

EC2402-OPTICAL COMMUNICTION AND NETWORKING VII SEM. ECE EC2402- OPTICAL COMMUNICATION AND NETWORKING TWO MARKS QUESTIONS AND ANSWERS UNIT I - Introduction 1. What are the limitations of optical fiber communication systems?  Optical fiber is made up of glass. Because of the impurities present with the fiber It results in absorption, which leads to loss of light in the optical fiber.  It is costly.  Maximum limitation of the bandwidth of the signals can be carried by...

What is the purpose of exterior cladding? Protect the building structure and interior from damage due to water and snow, wind, pests, and mechanical damage. Provide reasonable security, and enhance the appearance of the house How far above grade should wall cladding materials be to protect the cladding system and structure from damage? 6 to 8 inches How far above grade should masonry be? 4 inches For most sidings, how far above grade should cladding be? 6 inches Where are...

Mode Field Diameter - ANSWER The diameter of the light emerging from the end of the fiber is also termed... core, cladding, and prime coating - ANSWER The basic construction of fiber is: zig-zag - ANSWER A multimode step-index fiber transmits light down the fiber in what pattern?

NCTI FIELD TECH 4-5 TEST EXAM Complete Solutions | Latest 2023/2024 What term describes the number of wave crests that pass a fixed point during a particular period of time? -- Frequency In data networking, this term is defined as "Signals may flow in either direction, but not simultaneously". -- Half-duplex Two CPUs have the same size data bus. Which one will process data faster? -- The one with a higher clock speed This unique ID number is coordinated by the Institute of Electrical a...

ETA Fiber/ fiber optics questions and answers already passed L.A.S.E.R light amplification by stimulated emission of radiation GTE installs first commercial fiber systems in place for service in 1977 Advantages of Fiber Bandwidth weight security fiber fabrication steps making a preform; drawing fiber preform types (3) MCVD, OVD, VAD layers of fiber core, cladding, acrylate coating, buffer Core size of multimode cables 62.5um and 50um core size of single mode cable...

BICSI INSTALLER 2 EXAM QUESTIONS WITH COMPLETE SOLUTIONS VERIFIED 1 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The decrease in magnitude or the power loss of a signal that propagates between points, expressed in decibels (dB) as the ratio of received sign...