Millwright test exam Study guides, Class notes & Summaries

If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ wear tracks will be the indicator. - correct answer Unusual For removing hard to remove gasket materials found on sealing surfaces ______ is recommended. - correct answer sharpened brass putty knife Apprenticeship training is - correct answer Conducted on the job Charting alignment on a graph requires a chart that is divided into thousandths of an inch vertically for the indicator readings and...

Millwright Level 4 practice test review Exam Questions And Answers The best method of alignment to apply when shafts can not be axially secured is? cross dialing Sag corrections in dial setting are applied only to? vertical rim readings limitations in use of cross dialing methods include substantial brackets for long spans, less accuracy over short spans, and? both shafts must turn optalign plus alignment requires the transducer assembly be mounted upon the? primary equipment dependin...

Millwright Level 4 practice test review Exam Questions And Answers Graded A+ The best method of alignment to apply when shafts can not be axially secured is? cross dialing Sag corrections in dial setting are applied only to? vertical rim readings limitations in use of cross dialing methods include substantial brackets for long spans, less accuracy over short spans, and? both shafts must turn optalign plus alignment requires the transducer assembly be mounted upon the? primary...

Belts test - Millwright level 2 Exam Questions With Verified Answers High capacity V-Belts -Also called wedge, hi-torque, or narrow v-belts -The three sizes are 3C, 5V, & 8V. Meaning they have 3/8", 5/8", and 8/8" (1") of top width. What does 3V2550 indicate? 3/8" width and 25" pitch line length, What does 8V550 indicate? 8/8" = 1" and 50" pitch length, V= V-belt What does 3V3550 indicate? 3/8" and 35.5" pitch length, V= V-belt What does 3L indicate? 3/8" Light duty V-bel...

NCCER MILLWRIGHT PRACTICE EXAM 2 QUESTIONS & ANSWERS 100% Correct. sharpened brass putty knife - ANSWER-For removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on the job - ANSWER-Apprenticeship training is_______ distance - ANSWER-Charting alignment on a graph requires a chart that is divided into thousandths of an inch vertically for the indicator readings and into whole inches horizontally for the__________ hidden - ANSWER-The orthographic...

Belts test - Millwright level 2 Exam Questions With Verified Answers High capacity V-Belts -Also called wedge, hi-torque, or narrow v-belts -The three sizes are 3C, 5V, & 8V. Meaning they have 3/8", 5/8", and 8/8" (1") of top width. What does 3V2550 indicate? 3/8" width and 25" pitch line length, What does 8V550 indicate? 8/8" = 1" and 50" pitch length, V= V-belt What does 3V3550 indicate? 3/8" and 35.5" pitch length, V= V-belt What does 3L indicate? 3/8" Light duty V-bel...

Millwright Test Exam Questions With Verified Answers Graded A+ 2024/2025 If the seal was not properly aligned or there is excessive wear in some bearing or shaft______ wear tracks will be the indicator. Unusual For removing hard to remove gasket materials found on sealing surfaces ______ is recommended. sharpened brass putty knife Apprenticeship training is Conducted on the job Charting alignment on a graph requires a chart that is divided into thousandths of an inch verticall...

Millwright Level 4 practice test review Exam Questions And Answers Graded A+ The best method of alignment to apply when shafts can not be axially secured is? cross dialing Sag corrections in dial setting are applied only to? vertical rim readings limitations in use of cross dialing methods include substantial brackets for long spans, less accuracy over short spans, and? both shafts must turn optalign plus alignment requires the transducer assembly be mounted upon the? primary...