Tentamen (uitwerkingen)
NJ Boaters License Exam May 2021
- Vak
- Instelling
NJ Boaters License Exam May 2021
[Meer zien]Voorbeeld 2 van de 13 pagina's
Voorbeeld 2 van de 13 pagina's
In winkelwagen
In winkelwagen
gesponsord bericht van onze partner
1 beoordeling
Door: maddfin • 5 maanden geleden
Verkoper
Volgen
Boffin
Ontvangen beoordelingen
Voorbeeld van de inhoud
NJ Boaters License Exam May 2021 Bow - Front of a vessel Cleat - Metal fitting on which a rope can be fastened Gunwale - Upper edge of vessel's side Hull - Body of a vessel Port - Left side of a vessel Propeller - Rotates and powers a boat forward or backward Starboard - Right side of a vessel Stern - Rear of a vessel Beam - Maximum width of a vessel Draft - Depth of water needed to float a vessel Freeboard - Distance from water to lowest point of the boat where water could come on board Keel - Main centerline (backbone) of a vessel or the extension of hull that increases stability in the water Displacement and planning - two basic types of boat hulls are... Displacement - Boats with ____________________ hulls move through the water by pushing the water aside and are designed to cut through the water with very little propulsion. Slower speeds - Boats with displacement hulls are limited to Round -bottomed hull - A ___________________________________ shape acts as a displacement hull. Mos t large cruisers and most sailboats have displacement hulls, allowing them to travel more smoothly through the water. planning hulls - Boats with ________________________ are designed to rise up and glide on top of the water when enough power is supplied True - T or F: boats may operate like displacement hulls when at rest or at slow speeds but climb toward the surface of the water as they move faster High speed - Boats with planing hulls can skim along at _____________________, riding almost on top of the water rather than pushing it aside Flat-Bottomed and Vee -Bottomed Hull - ____________________ and _____________________ shapes act as planing hulls Personal watercraft (PWC) - A small vessel that uses an inboard jet drive as its primary source of propulsion and is designed to be operated by a person or persons sitting, standing, or kneeling on the vessel rather than inside the vessel Displacement Mode - A planing hull, when opera ted at very slow speeds, will cut through the water like a displacement hull. plowing mode - As speed increases, a planing hull will have a raised bow, reducing the operator's vision and throwing a very large wake. Avoid maintaining a speed that puts your boat in __________________ planning mode - Your boat is in ___________________________ when enough power is applied so that the hull glides on top of the water. Different boats reach ______________________ at different speeds. Flat-Bottomed Hull - Advan tage: Has a shallow draft, which is good for fishing in small lakes and rivers. Disadvantage: Rides roughly in choppy waters Deep -Vee Hull - Advantage: Gives a smoother ride than a flat -bottomed hull in rough water. Disadvantage: Takes more power to move at the same speed as flat -bottomed hulls. May roll or bank in sharp turns. Round -Bottomed Hull - Advantage: Moves easily through the water even at slow speeds. Disadvantage: Has a tendency to roll unless it has a deep keel or stabilizers. Multi -Hull - Advantage: Has greater stability because of its wide beam. Disadvantage: Needs a large area when turning. Length overall - dictates the equipment the vessel must have to comply with federal and state laws; is measured from the tip of the bow in a straight line to the stern of the vessel. NO - are bowsprits; rudders; outboard motors and motor brackets; handles; and other fittings, attachments, and extensions included in the measurement rudder - Steering device, usually a vertical blade attached to a post at, or near, the stern of the boatVoordelen van het kopen van samenvattingen bij Stuvia op een rij:
Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper Boffin. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €9,88. Je zit daarna nergens aan vast.
Is Stuvia te vertrouwen?
4,6 sterren op Google & Trustpilot (+1000 reviews)
Afgelopen 30 dagen zijn er 72042 samenvattingen verkocht
Opgericht in 2010, al 14 jaar dé plek om samenvattingen te kopen