Solutions for Undergraduate Instrumental Analysis, 8th Edition Bruno (All Chapters included)
40 keer bekeken 0 keer verkocht
Vak
Certified instrument specialist
Instelling
Certified Instrument Specialist
Complete Solutions Manual for Undergraduate Instrumental Analysis, 8th Edition by Thomas J. Bruno, James W. Robinson, George M. Frame II, Eileen Skelly Frame ; ISBN13: 9781032036915. (Full Chapters included Chapter 1 to 17)....
1. Concepts of Instrumental Analytical Chemistry
2. Safety in the Ins...
1.3 (a) See Section 1.3.2
(b) Analyze a known material, such as a National Institute of Standards and Technology Standard
Reference Material. Analyze the sample using a different procedure that is known to be reliable (i.e.,
a “standard method”).
1.4 Uncertainty is a quantity associated with the result of a measurement that characterizes the dispersion
of the values that could reasonably be attributed to the measurement, and ideally includes all factors
that are incorporated in the uncertainty budget, including any calibration or standardization.
Uncertainty ideally incorporates all of the factors that can influence dispersion about the measured
value (that is, the uncertainty budget). Precision is a description of the dispersion about a central or
average value of a measurement. Error is the difference (by subtraction) between the reference result
(or accepted true result) and the measured result of an analysis.
1.5 (a) The population standard deviation, σ, is the difference between the maximum and one inflection
point of a Gaussian distribution of answers. Mathematically, Eqn. 1.11 defines it.
(b) 95.5 % should fall within ± 2σ of the mean.
1.6 s = 0.10; σ = 0.097 = 0.10 (rounded off to 2 decimal places)
1.7 mean = 0.1022; average deviation = sum of the absolute deviations divided by the mean = (0.0001 +
0.0003 + 0.0003 + 0.0001)/0.1022 = 0.008; s = 0.0002; % RSD = 0.2 %; absolute error of the mean
= | 0.1022 – 0.1026| = 0.0004; relative error of the mean = (0.0004/0.1026) = 0.004.
1.8 4; 3; 2 (assume that the terminal zero is significant); 1; 3; 6 (assume that the terminal zero(s) is/are
significant).
1.9 6.483 rounds off to 6.5; 2.9879 rounds off to 3.0 (assume 1.0 has 2 sig. figs.); 7.77316 × 106 rounds
off to 7.8 × 106.
1.10 Using all data points: (a) mean = 2.17; (b) s = 0.12; (c) 2.17 ± 0.24; (d) 2.51 seems high. Without
using 2.51, recalculate a, b and c. New (a) mean = 2.13; (b) s =0.03; 4s = 0.12 and mean + 4s = 2.25.
Therefore 2.51 can be considered as a suspected outlier. Remind students that there is no test that
indicates a result can or should be rejected, only that it may be an outlier. (c) 2.13 ± 0.06. The second
set of values for a, b and c are correct.
1.11 (a) See Section 1.2.3;
(b) See Section 1.2.4
1.12 (a) See Section 1.3.2;
3
, (b) precision (Section 1.3.3.2)
1.13 (a) No, 2.13 + 0.06 = 2.19, which is less than 2.5 ppm.
(b) Yes, the lower limit is 2.13 – 0.6 = 2.07 ppm, which is greater than 2.00.
1.14 0.70 – 2(0.09) = 0.52 ppm Cu. The patient’s serum is within the 95 % CL for normal serum Cu based
on the test method (and well within the 99 % CL; 0.70 – 3(0.09) = 0.43 ppm). Treatment should not
be started. The doctor could have another serum Cu test done, along with a urine Cu test, to provide
more information, or should ask the laboratory if a method for serum Cu with a smaller standard
deviation (better precision) is available.
1.15 3.30 × 10-2
1.16 68.3 %
1.17 Using the Student’s t table (Table 1.9) and 7 degrees of freedom,
1.18 (a) 99.7 %;
(b) 95.5 %
1.19 Drift or flicker noise and some types of noise from the surroundings (building vibrations, power
lines) are frequency dependent. Decreasing the temperature of instrument components can decrease
thermal noise, a type of white noise.
1.20 (a) S/N = 1.50/0.299 =5.02;
(b) S/N = 100 is a 20 fold improvement over the current S/N. To improve the S/N by a factor of 20,
400 measurements must be averaged, since (400)1⁄2 = 20.
1.21 Figure 1.13
(b) S/N ≈ 4.3; Figure 1.13
(c) S/N ≈ 1.5. (b) is approximately 3 times greater than (c), therefore 9 measurements must be aver-
aged.
1.22
From Table 1.9, t for (N–1)=5 is 2.57. The calculated t of 3.31 > 2.57; therefore a significant differ-
4
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper mizhouubcca. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €28,84. Je zit daarna nergens aan vast.