LIQUID PENETRANT LEVEL II ACTUAL EXAMS QUESTIONS WITH COMPLETE VERIFIED ANSWERS BY EXPERT GRADED A++
2 keer bekeken 0 keer verkocht
Vak
LIQUID PENETRANT LEVEL II
Instelling
LIQUID PENETRANT LEVEL II
LIQUID PENETRANT LEVEL II ACTUAL EXAMS QUESTIONS WITH COMPLETE VERIFIED ANSWERS BY EXPERT GRADED A++
Which of the following discontinuities could be classified as a finishing processing discontinuity?
-Heat-treat crack
Aluminum alloy test specimens that have been tested by the liquid penetrant...
LIQUID PENETRANT LEVEL II ACTUAL EXAMS QUESTIONS WITH
COMPLETE VERIFIED ANSWERS BY EXPERT GRADED A++
Which of the following discontinuities could be classified as a finishing processing
discontinuity?
-Heat-treat crack
Aluminum alloy test specimens that have been tested by the liquid penetrant method
should be thoroughly cleaned after testing because:
-the alkaline content of wet developers and most emulsifiers could result in surface pitting,
particularly in moist atmospheres.
Which factor would apply in determining the dwell time required for the penetrant to be
effective?
-Type of discontinuity sought.
Which of the following physical properties, more than any other, determines what makes a
material a good penetrant?
-No one single property determines if a material will or will not be a good penetrant.
Which of the following discontinuities might be found in rolled plate?
-Laminations
Which of the following is NOT recommended method of removing grease from a surface of
a part to be penetrant tested?
-Hot water rinse
, Which of the following is NOT a form in which penetrant developer is commonly
available?
-High viscosity developer
When using post-emulsification penetrants, difficulties incurred during the washing
operation can be overcome by:
-completely reprocessing the part from surface preparation on and by using a longer emulsifier
time.
The function of the emulsifier in the post-emulsification penetrant method is to:
-react with the surface penetrant to make the penetrant water-washable.
Which of the following is a discontinuity that might be found in forging?
-Lap
Shrinkage cracks are usually found in what areas of a casting?
-Abrupt changes in thickness
Which of the following is an advantage of visible dye penetrants over fluorescent
penetrants?
-No special lighting is required.
Of the methods listed below, the most effective means of precleaning a test item prior to a
penetrant test is:
-vapor degreasing
Which of the following statements concerning contaminating materials on the surface of a
part to be penetrant tested is NOT true?
-The contaminant may retain the penetrant and thus increase the sensitivity of the inspection
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper AcademicSuperScores. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €8,66. Je zit daarna nergens aan vast.
