Tentamen (uitwerkingen)

API 510 Closed Book Practice Exam Questions and Answers 100% Pass

0 keer verkocht

Vak
API 510

Instelling
API 510

[Meer zien]

Voorbeeld 2 van de 11 pagina's

Bekijk voorbeeld

Geupload op 29 juni 2024
Aantal pagina's 11
Geschreven in 2023/2024
Type Tentamen (uitwerkingen)
Bevat Vragen en antwoorden

api 510 closed book practice exam questions and an

Volgen

ACADEMICAIDSTORE

Lid sinds 3 jaar 1134 documenten verkocht

€10,49

In winkelwagen

Op verlanglijstje

100% tevredenheidsgarantie
Direct beschikbaar na je betaling
Lees online óf als PDF
Geen vaste maandelijkse kosten

API 510 Closed Book Practice Exam Questions and
Answers 100% Pass
API 510 says that widely scattered pitting can be ignored provided that the:
remaining thickness is not less than 1/2 the minimum required thickness.

Rupture disks are commonly used
to protect a pressure relief valve from corrosive products.

When repairs and alterations are being conducted, which individual or organization is responsible
Repair Organization

Which code provides requirements for Hot Tapping?
API 2201

Catalytic reformer vessels may have creep damage if the operating temperature is above:
900°F

The maximum inspection interval for a pressure relief device in normal service is based on:
acceptable performance of the device with a maximum interval of 5 year.

A carbon steel vessel in caustic service has a temperature excursion up to 425°F. The vessel wall is
1/2" thick. No PWHT has been performed. What type of deterioration could be expected?
Stress corrosion cracking

During a vessel repair or alteration, when can controlled deposition welding be used as an alternative
for post weld heat treating?
For P1, P3, & P4 materials

All RBI assessments must be:
thoroughly documented.

Once vessel repair work is complete, who should approve the finished work?
Authorized inspector

Which of the following activities is not included in the scope of API 510?
Operating a vessel

Which type of corrosion is most easily missed by a visual examination?
Uniform corrosion

The maximum allowable working pressure of a vessel is the:
maximum pressure permitted at the top of the vessel.

, The use of a fillet weld patch on a vessel's pressure boundary requires approval from the:
Authorized inspector and the pressure equipment engineer

During alterations, fabrication approvals (hold points) shall be designated by:
authorized inspector

Per API 510, a PRV repair organization must:
Have a fully documented quality assurance system and training program

During vessel repairs or alterations, welding records shall be:
Available to the authorized inspector

Repairs Of vessel cracks at a serious stress concentration requires approval by:
pressure vessel engineer

The seating surfaces on a relief device must have a flatness of:
3 light beads/bands

An "F" on the radiograph indicates:
The IQI is placed on film side

An inspector is evaluating a corroded area on the vessel per API 510. The area is marked off in a grid
with five longitudinal lines. Multiple thickness readings are taken on each longitudinal line. When
performing remaining life calculations for this corroded area, the current thickness reading to use in
the calculation is the:
Average thickness of the longitudinal line with the lowest average

API 510 takes effect:
Once the vessel is placed in service

Erosion or corrosion in an exchanger shell that is adjacent to the bundle baffles can be most easily
found during an internal inspection with:
Flashlight beam directed parallel to the shell's internal surface

During a vessel repair, if a preheat is substituted for a post-weld heat treatment, who is required to
review this substitution?
Pressure vessel engineer

Which of the following is NOT an acceptable method for repairing a locally thinned area that is below
acceptable thickness?
Install a thick-film coating to arrest the corrosion

When qualifying a weld procedure using the SMAW process, which variable is considered an essential
variable?
Filler rod "F-number"

Dit zijn jouw voordelen als je samenvattingen koopt bij Stuvia:

Bewezen kwaliteit door reviews

Studenten hebben al meer dan 850.000 samenvattingen beoordeeld. Zo weet jij zeker dat je de beste keuze maakt!

In een paar klikken geregeld

Geen gedoe — betaal gewoon eenmalig met iDeal, creditcard of je Stuvia-tegoed en je bent klaar. Geen abonnement nodig.

Direct to-the-point

Studenten maken samenvattingen voor studenten. Dat betekent: actuele inhoud waar jij écht wat aan hebt. Geen overbodige details!

Veelgestelde vragen

Wat krijg ik als ik dit document koop?

Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.

Tevredenheidsgarantie: hoe werkt dat?

Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.

Van wie koop ik deze samenvatting?

Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper ACADEMICAIDSTORE. Stuvia faciliteert de betaling aan de verkoper.

Zit ik meteen vast aan een abonnement?

Nee, je koopt alleen deze samenvatting voor €10,49. Je zit daarna nergens aan vast.

Is Stuvia te vertrouwen?

4,6 sterren op Google & Trustpilot (+1000 reviews)

Afgelopen 30 dagen zijn er 69052 samenvattingen verkocht

Opgericht in 2010, al 15 jaar dé plek om samenvattingen te kopen

Begin nu gratis

Tentamen (uitwerkingen)

API 510 Closed Book Practice Exam Questions and Answers 100% Pass

Document informatie

Onderwerpen

Geschreven voor

Verkoper

Ontvangen beoordelingen

Voorbeeld van de inhoud