FANUC SECE Test Questions with Correct Answers 100% Verified
8 keer bekeken 0 keer verkocht
Vak
FANUC
Instelling
FANUC
FANUC SECE Test Questions with Correct Answers 100% Verified
T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor speed and position - Correct Answer True
What is the correct way to recover from a DCS Joint Position Check alarm? - Correct Answer Pres...
what is the correct way to recover from a dcs join
which of the following allows you to enable dcs ca
the dcs opsfty signals are hardwired to which unit
Geschreven voor
FANUC
FANUC
Verkoper
Volgen
Winfred
Ontvangen beoordelingen
Voorbeeld van de inhoud
FANUC SECE Test Questions with Correct Answers
100% Verified
T/F: Dual Check Safety position/Speed features do not need additional external sensors to monitor
speed and position - Correct Answer True
What is the correct way to recover from a DCS Joint Position Check alarm? - Correct Answer Press
SHIFT + RESET and then jog away from the limit.
Which of the following allows you to enable DCS Cartesian Speed Check? - Correct Answer *Program
instruction
*Setting on the DCS Cartesian Speed Check menu
*System Variable setting
**All of the above**
The DCS OPSFTY signals are hardwired to which unit on the R-30iB Controller? - Correct Answer
Emergency Stop Board
There are two levels of DCS Code numbers Master and Local. The Local are...? - Correct Answer Base,
Position/Speed Check, and I/O Connect
If updated in Non-DCS menus, what does not need to be applied to the DCS Parameter? Hint:
Consider ALL possible setup situations - Correct Answer Axis limits
The maximum number of Cartesian Position Check Zones? - Correct Answer 32
If creating a model for your tooling what is the maximum number of shape elements that can be
used? - Correct Answer 10
T/F: A Maximum of 5 elements can be combined to result in a single Output per line. - Correct
Answer False
Guarding a Zone against more than three USER MODELS is done with: - Correct Answer The Tool
Change Function
, To Cycle Power from the teach pendant? - Correct Answer Make sure the teach pendant is ON. Then
press the FCTN, Select CYCLE POWER.
When replacing the regenerative resistor unit on an A-cabinet... - Correct Answer Remove the side
panel and the louver and then two screws will allow for removal of the unit.
If you hold PREV and NEXT on the TP while applying power to the controller, eventually the following
screen will appear? - Correct Answer Configuration Menu
An error code SRVO-075, Pulse Not Established indicates? - Correct Answer Each axis that lost
mastering must be rotated one motor revolution
If the input fuse, F1, on the power supply is blown, you will have? - Correct Answer No display on the
teach pendant
A blown input fuse, F1, on the power supply could be caused by? - Correct Answer A shorted fan
wire harness
The Emergency stop button on the SOP will? - Correct Answer Remove the nominal 220VAC three
phase from the servo amplifier
Power supply regeneration refers to? - Correct Answer A method whereby excess motor power is fed
back into the supply line.
A new battery can maintain the contents of SRAM memory for about? - Correct Answer Four Years
Robot positional feedback is provided by? - Correct Answer Serial Pulse Coder
The battery pack in the base of the robot provides power to? - Correct Answer The motor SPCs
The relays contacts which bring power to the coils of KM1 and KM2 are located on the? - Correct
Answer Emergency stop circuit board
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper Winfred. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €10,34. Je zit daarna nergens aan vast.
