100% tevredenheidsgarantie Direct beschikbaar na betaling Zowel online als in PDF Je zit nergens aan vast
logo-home
Hearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% Correct €12,75   In winkelwagen

Tentamen (uitwerkingen)

Hearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% Correct

 8 keer bekeken  0 keer verkocht
  • Vak
  • Hearing aid dispenser
  • Instelling
  • Hearing Aid Dispenser

Hearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispenser: Mock Exam #4 Questions and Answers 100% CorrectHearing Aid Dispens...

[Meer zien]

Voorbeeld 3 van de 16  pagina's

  • 29 augustus 2024
  • 16
  • 2024/2025
  • Tentamen (uitwerkingen)
  • Vragen en antwoorden
  • Hearing aid dispenser
  • Hearing aid dispenser
avatar-seller
Hearing Aid Dispenser: Mock Exam #4
Questions and Answers 100% Correct
If a patient comes into your office with an audiogram showing a PTA 10 dB AD and 50 dB AS
with a flat configuration and 2K 5 dB peak, sensorineural and reduced SDT scores you would be
looking at:
a. Hearing loss caused by loud noise
b. Hearing loss caused by birth
c. Hearing loss caused by otitis media
d. Hearing loss caused by Meniere's - ANSWER - d. Hearing loss caused by Meniere's


If a patient comes into your office with an audiogram showing a sensorineural PTA 50 dB AU
with a notch at 4 K and reduced SDT scores you would be looking at:
a. Hearing loss caused by loud noise
b. Hearing loss caused by birth
c. Hearing loss caused by otitis media
d. Hearing loss caused by central problem - ANSWER - a. Hearing loss caused by loud noise


When fitting a patient with a PTA greater than 70 dB the best type of mold would be:
a. Soft material with a long canal and no vent
b. Lucite material with a short canal and no vent
c. Soft material with a short canal and IROS vent
d. All of the above - ANSWER - a. Soft material with a long canal and no vent
BTE earmold used for normal hearing to 1000 Hz and a ski slope loss at 4000 Hz:
a. Lucite with a short canal and IROS "A" vent
b. Lucite with a long canal and reverse IROS "A"
c. Regular fitting with T-22 receiver
d. Soft with a long - ANSWER - a. Lucite with a short canal and IROS "A" vent


What is used in the good ear in a CROS fitting:

,a. Shell made of the soft material
b. Non-occluding made of hard lucite
c. Skeleton made of hard lucite
d. Non-occluding mold with short canal - ANSWER - d. Non-occluding mold with short canal


Which is used with high frequency loss;
a. Small pressure vent
b. Long canal
c. Small diameter sound channel
d. Large diameter sound channel - ANSWER - d. Large diameter sound channel


If you have an BTE with an HFA SSPL 90 of 117 dB, Frequency range of 140-5600 Hz and an
HFA FOG gain of 46 dB this would be for a:
a. Severe sensorineural loss
b. Severe HF sensorineural loss
c. Mild HF sensorineural loss
d. Moderate HG sensorineural loss - ANSWER - a. Severe sensorineural loss


Which earmold is used for a high frequency loss:
a. Shell made of soft material
b. Non-occluding made of hard lucite
c. Skeleton made of hard lucite
d. All of the above - ANSWER - b. Non-occluding made of hard lucite


Which is a non-occluding earmold:
a. Free Field
b. Receiver
c. Shell
d. Soft - ANSWER - a. Free Field

, What is the use for a Libby horn:
a. Give the patient only high frequencies.
b. Give the patient more power with high frequencies added
c. Give the patient only more power
d. Give the patient lower power - ANSWER - b. Give the patient more power with high
frequencies added


Placing an earmold in the ear canal will:
a. Enhance the natural ear canal resonance
b. Eliminate the natural ear canal resonance
c. Result in the "tin ear effect"
d. Enhance the "horn effect" - ANSWER - b. Eliminate the natural ear canal resonance


A longer canal on an earmold:
a. Enhances low frequencies
b. Enhances high frequencies
c. Used only on very long canals
d. Always comes with a small pressure vent - ANSWER - a. Enhances low frequencies


Which of the following is NOT an earmold acoustical difference option:
a. Tubing diameter
b. Interaural Attenuation
c. Bore diameter
d. Knowles acoustic damper - ANSWER - b. Interaural Attenuation


Which of the following is NOT a characteristic of a "high frequency mold':
a. Non-occluding
b. Long canal
c. Short canal
d. Large vent - ANSWER - b. Long canal

Voordelen van het kopen van samenvattingen bij Stuvia op een rij:

Verzekerd van kwaliteit door reviews

Verzekerd van kwaliteit door reviews

Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!

Snel en makkelijk kopen

Snel en makkelijk kopen

Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.

Focus op de essentie

Focus op de essentie

Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!

Veelgestelde vragen

Wat krijg ik als ik dit document koop?

Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.

Tevredenheidsgarantie: hoe werkt dat?

Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.

Van wie koop ik deze samenvatting?

Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper NursingTutor1. Stuvia faciliteert de betaling aan de verkoper.

Zit ik meteen vast aan een abonnement?

Nee, je koopt alleen deze samenvatting voor €12,75. Je zit daarna nergens aan vast.

Is Stuvia te vertrouwen?

4,6 sterren op Google & Trustpilot (+1000 reviews)

Afgelopen 30 dagen zijn er 67096 samenvattingen verkocht

Opgericht in 2010, al 14 jaar dé plek om samenvattingen te kopen

Start met verkopen
€12,75
  • (0)
  Kopen