Tentamen (uitwerkingen)
A.2.2 Software
- Vak
- A.2.2 Software
- Instelling
- A.2.2 Software
Exam of 44 pages for the course A.2.2 Software at A.2.2 Software (A.2.2 Software)
[Meer zien]Voorbeeld 4 van de 44 pagina's
Voorbeeld 4 van de 44 pagina's
In winkelwagengesponsord bericht van onze partner
Verkoper
Volgen
Voorbeeld van de inhoud
QA.2.2 SOFTWARE COMPLETEDETAILED CASE STUDY
You are the IT administrator for a small corporate network. You are configuring Windows Update on the
Office2 workstation in Office 2.
In this lab, your task is to complete the following:
Set the active hours of the workstation to 6:00 a.m. to 11:00 p.m.
Configure Windows Update to install updates semi-annually.
Allow other Microsoft products to update when I update Windows.
Defer the update to 90 days.
Set security improvements to 0 days.
Set Pause Updates to Off. - -In this lab, your task is to complete the following:
-Set the active hours of the workstation to 6:00 a.m. to 11:00 p.m.
-Configure Windows Update to install updates semi-annually.
-Allow other Microsoft products to update when I update Windows.
-Defer the update for 90 days.
-Set security improvements for 0 days.
-Set Pause Updates to Off.
Complete this lab as follows:
-Right-click Start and select Settings.
-Maximize the window for easier viewing.
-Select Update & security.
-Under Update Settings, select Change active hours.
-Set the Start time to 6:00 a.m.
-Select the check mark.
-Set the End time to 11:00 p.m.
,-Select the check mark.
-Select Save.
-Select Advanced options.
-Select Give me updates for other Microsoft products when I update Windows.
-From the Choose when updates are -installed drop-down list, select Semi-Annual Channel.
-From the deferred update drop-down list, select 90.
-From the deferred security improvements drop-down list, select 0.
-Set Pause Updates to Off.
You work at a computer repair store. You want to use the RAID feature on the motherboard to configure
two RAID arrays. You have installed five new SATA hard drives in the computer. You have installed
Windows on the first drive, and you want to use the other four drives in your RAID arrays.
In this lab, your task is to complete the following:
Configure RAID for the SATA drive mode.
Define LD1 as a striped array using all of the space on two disks.
Define LD2 as a mirrored array using all of the space on two disks. - -Configure RAID for the SATA drive
mode as follows:
-On the computer, select the power button to turn the computer on.
-When you see the BIOS load screen, press Delete to enter the BIOS.
-In the left pane, expand System Configuration.
-Select SATA Operation.
-In the right pane, select RAID On.
-Select Apply.
-Click Exit.
Define LD1 and LD2 as follows:
-Enter CTRL + I to enter the RAID Configuration Utility.
-With Create RAID Volume highlighted, press Enter.
-In the Name field, enter the volume name.
-Press the TAB key to highlight RAID Level.
-Select the RAID Level.
,-Use the up and down arrow keys to select the RAID level.
-Press the TAB key to highlight Select Disks.
-Press Enter.
-Select disks 2 and 3; then press Enter.
-Press the TAB key to highlight Create Volume.
-Press Enter.
-Press Y to create the first RAID array.
-Repeat steps 2b-2k to create the second RAID array.
You are the IT administrator for a small corporate network. You have decided to upgrade your network
adapter to a Gigabit Ethernet adapter on the Support workstation. You have already installed the
network card in a free PCIe slot and downloaded the latest drivers from the manufacturer's website.
Currently, your computer has two network adapters, the new one you just added, and the original one
you are replacing. Rather than remove the first network adapter, you decide to leave it in your computer.
However, you do not want Windows to use the network adapter.
In this lab, your task is to complete the device configuration using Device Manager as follows:
Update the device driver for the Broadcom network adapter using the driver in the D:\drivers folder.
Disable the Realtek network adapter. - -Right-click Start and select Device Manager.
-Expand Network adapters.
-Right-click Broadcom NetXtreme 57xx Gigabit Controller and select Update driver.
-Select Browse my computer for driver software to use the driver that you have downloaded.
-In the Search for driver software in this location field, enter D:\drivers.
Make sure Include subfolders is selected and then click Next.
-After the driver is installed, click Close.
-Right-click Realtek 8169 and select Disable device.
-Click Yes to confirm that you want to disable the device.
You are the IT administrator for a small corporate network. You have recently experienced some
problems with devices on the workstation in the Support Office.
In this lab, your task is use Device Manager to complete the following:
, The new network card you installed isn't working as expected (speed is only 1 Mbps). Until you can
figure out what the problem is, disable the Broadcom network adapter and enable the Realtek network
adapter.
To make sure the network adapter has the latest drivers, update the driver for the Realtek network
adapter by searching Microsoft Update.
You recently updated the driver for your video card. However, the system experiences periodic crashes
that you suspect are caused by the new driver. Roll back the driver to a previous version.
Move qthe qEthernet qcable qto qthe qintegrated qnetwork qport qon qthe qmotherboard. q- q-Right-click qStart
qand qselect qDevice qManager.
-Expand qNetwork qadapters.
Disable qthe qnetwork qadapter qas qfollows:
-Right-click qBroadcom qNetXtreme q57xx qGigabit qController qand qselect qDisable qdevice.
-Click qYes.
-Right-click qRealtek q8169 qand qselect qEnable qdevice.
Update qthe qdriver qas qfollows:
-Right-click qRealtek q8169 qand qselect qUpdate qdriver.
-Select qSearch qautomatically qfor qupdated qdriver qsoftware.
-After qthe qdriver qis qinstalled, qclick qClose.
Roll qback qthe qvideo qcard qdriver qas qfollows:
-Expand qDisplay qadapters.
-Right-click qATI qRadeon qHD q3300 qand qselect qProperties.
-Select qthe qDriver qtab.
-Select qRoll qBack qDriver.
-Click qYes.
-Click qOK.
Move qthe qEthernet qcable qto qthe qintegrated qnetwork qport qon qthe qmotherboard qas qfollows:
-From qthe qtop qnavigation qtabs, qselect qSupport qOffice.
-Above qthe qcomputer, qselect qBack qto qswitch qto qthe qback qview qof qthe qcomputer.
-Drag qthe qEthernet qconnector qfrom qthe qPCIe qNIC qto qthe qintegrated qnetwork qport qon qthe
qmotherboard.
Voordelen van het kopen van samenvattingen bij Stuvia op een rij:
Verzekerd van kwaliteit door reviews
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Snel en makkelijk kopen
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Focus op de essentie
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Veelgestelde vragen
Wat krijg ik als ik dit document koop?
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Tevredenheidsgarantie: hoe werkt dat?
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Van wie koop ik deze samenvatting?
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper learnsphere. Stuvia faciliteert de betaling aan de verkoper.
Zit ik meteen vast aan een abonnement?
Nee, je koopt alleen deze samenvatting voor €9,66. Je zit daarna nergens aan vast.
Is Stuvia te vertrouwen?
4,6 sterren op Google & Trustpilot (+1000 reviews)
Afgelopen 30 dagen zijn er 52355 samenvattingen verkocht
Opgericht in 2010, al 14 jaar dé plek om samenvattingen te kopen