,Preamble
Worked-out problems serve as a guide to problem solving (and in this particular case dealing with
thermodynamic problems). The problems listed here may give you some guidance in how to solve
the problems. Students are urged to seriously attempt problems by themselves before going over
the answers. The answers may contain some errors, but the methodology applied will be correct.
The following types of problems are listed:
1. Heating of a single component
2. Compression of a single component
3. Expansion of a single component
4. Single component phase equilibrium
5. Fugacity
6. Vapour-liquid equilibrium
7. Liquid-liquid equilibrium
8. Solid-liquid equilibrium
9. Chemical equilibrium
, 1. Heating/cooling of a single component
Calculate the enthalpy change of nitrogen as it undergoes a process from -50°C and 2 MPa to 40°C
and 6 MPa. Assume that:
(a) Nitrogen can be described by the ideal gas equation
𝑅𝑇 𝑎
(b) Nitrogen can be described by the following equation of state: 𝑉 = 𝑝 − 𝑅𝑇 + 𝑏 with a =
0.01386 Pa·m6/mol2 and b = 3.86410-5 m3/mol
Data: 𝐶𝑃,𝑁2 = 27.318 + 0.623 ∙ 10−2 ∙ 𝑇 − 0.095 ∙ 10−5 ∙ 𝑇 2
For an ideal gas, the enthalpy is only a function of temperature (and not of pressure):
𝑇2 =313𝐾
∆𝐻 𝐼𝐺 = ∫ 𝐶𝑃,𝑁2 ∙ 𝑑𝑇
𝑇1 =223𝐾
0.623 ∙ 10−2 0.095 ∙ 10−5
= 27.318 ∙ (𝑇2 − 𝑇1 ) + ∙ (𝑇2 2 − 𝑇1 2 ) − ∙ (𝑇2 3 − 𝑇1 3 )
2 3
𝑘𝐽
Substituting all numbers: ∆𝐻 𝐼𝐺 = 2.60 ∙ 𝑚𝑜𝑙
For the real gas: ∆𝐻 = 𝐻(𝑇2 , 𝑝2 ) − 𝐻(𝑇1 , 𝑝1 )
𝜕𝑉
𝑑𝐻 = 𝐶𝑝 ∙ 𝑑𝑇 + (𝑉 − 𝑇 ∙ ( ) ) ∙ 𝑑𝑝
𝜕𝑇 𝑝
𝜕𝑉 𝑅𝑇 𝑎 𝑅 𝑎 2∙𝑎
(𝑉 − 𝑇 ∙ ( ) ) = − +𝑏−𝑇∙( + 2
)=− +𝑏
𝜕𝑇 𝑝 𝑝 𝑅𝑇 𝑝 𝑅𝑇 𝑅𝑇
Pathway (T1,p1) ideal gas state (T1,p=0) ideal gas state (T2,p=0) final state (T2,p2)
, A stream of pure ethylene is to be cooled down from 250oC to 25oC in a single-pass, counter-flow
heat exchanger. The gas enters the heat exchanger at 25 bar and a volumetric flow of 3 m3/min. The
𝐽
specific heat of ethylene as an ideal gas is given as 𝑐𝑃 𝐼𝐺 (𝑚𝑜𝑙∙𝐾) = 17.8 + 0.09 ∙ 𝑇(𝐾). Determine
the molar flow rate of ethylene entering the heat exchanger and the amount of heat transferred if
(a) ethylene is an ideal gas.
𝑅𝑇 𝑎
(b) ethylene obeys the van der Waals equation of state as 𝑝 = 𝑉−𝑏 − 𝑉 2 with a = 0.4614
(Pa.m6)/mol2 and b = 5.823.10-5 m3/mol.
𝑝
For an ideal gas, the molar flow rate is given by the ideal gas law 𝑛̇ = 𝑅𝑇 ∙ 𝑉̇. Hence, the molar flow
25∙105 𝑚𝑜𝑙
rate for the ideal gas is law 𝑛̇ 𝑖𝑛 = 8.314∙523.15 ∙ 3 = 1724 ∙ 𝑚𝑖𝑛
The amount of heat transferred in the heat exchange is given by the energy balance:
0 = 𝐻̇𝑖𝑛 − 𝐻̇𝑜𝑢𝑡 + 𝑄̇
Substituting the (rather trivial) molar balance (𝑛̇ 𝑖𝑛 = 𝑛̇ 𝑜𝑢𝑡 )
0 = 𝑛̇ 𝑖𝑛 ∙ (𝐻𝑖𝑛 − 𝐻𝑜𝑢𝑡 ) + 𝑄̇
or 𝑄̇ = 𝑛̇ 𝑖𝑛 ∙ (𝐻𝑜𝑢𝑡 − 𝐻𝑖𝑛 )
The heat exchange process takes place isobarically and thus the change in the enthalpy is given by:
298.15
𝑄̇ = 𝑛̇ 𝑖𝑛 ∙ (𝐻𝑜𝑢𝑡 − 𝐻𝑖𝑛 ) = 𝑛̇ 𝑖𝑛 ∙ ∫523.15 𝐶𝑃 ∙ 𝑑𝑇
Since the gas is an ideal gas, we can use the ideal gas heat capacity:
298.15 1724 𝑚𝑜𝑙 0.09
𝑄̇ = 𝑛̇ 𝑖𝑛 ∙ ∫523.15
𝑐𝑃 𝐼𝐺 ∙ 𝑑𝑇 = ∙ ∙ (17.8 ∙ (298.15 − 523.15) + ∙ (298.152 −
60 𝑠 2
𝑘𝐽
523.152 )) = 354 ∙ 𝑠
If ethylene is a gas obeying the van der Waals equation of state has to be used to determine the
molar flow rate. The easiest way is to transform the van der Waals equation into:
𝑍3 + 𝛼 ∙ 𝑍2 + 𝛽 ∙ 𝑍 + 𝛾 = 0
𝑎∙𝑝 𝑏∙𝑝
With 𝛼 = −1 − 𝐵; 𝛽 = 𝐴; 𝛾 = −𝐴 ∙ 𝐵 𝑎𝑛𝑑 𝐴 = (𝑅𝑇)2 ; 𝐵 = 𝑅𝑇
𝑁∙𝑚4 𝑁 𝑚3 𝑁
0.4614 ∙ ∙25∙105 ∙ 2 5.823∙10−5 ∙ ∙25∙105 ∙ 2
𝑚𝑜𝑙2 𝑚𝑜𝑙
𝐴= 𝑁𝑚
𝑚
2 = 0.0610 𝐵= 𝑁𝑚
𝑚
= 0.0335
(8.314∙ ∙523.15𝐾) 8.314∙ ∙523.15𝐾
𝑚𝑜𝑙∙𝐾 𝑚𝑜𝑙∙𝐾
Hence, the equation to be solved is 𝑍 3 − 1.0335 ∙ 𝑍 2 + 0.0610 ∙ 𝑍 − 0.00204 = 0 . This equation
can be solved iteratively using Newton-Raphson:
𝑍𝑜𝑙𝑑 3 − 1.0335 ∙ 𝑍𝑜𝑙𝑑 2 + 0.0610 ∙ 𝑍𝑜𝑙𝑑 + −0.00204
𝑍𝑛𝑒𝑤 = 𝑍𝑜𝑙𝑑 −
3 ∙ 𝑍𝑜𝑙𝑑 2 − 2 ∙ 1.0335 ∙ 𝑍𝑜𝑙𝑑 + 0.0610
starting with Z=1:
Zold Znew
1 0.974384
0.974384 0.972961
0.972961 0.972957
0.972957 0.972957
1 𝑝 𝑛̇ 𝐼𝐺 𝑚𝑜𝑙
Hence, Z=0.9730 𝑛̇ = 𝑍 ∙ 𝑅𝑇 ∙ 𝑉̇ = 𝑍 = 1772.3 ∙ 𝑚𝑖𝑛 (slightly larger seeing that the attractive
force will result in a more dense gas phase than the ideal case)
298.15
The amount of heat transferred is given by: or 𝑄̇ = 𝑛̇ 𝑖𝑛 ∙ (𝐻𝑜𝑢𝑡 − 𝐻𝑖𝑛 ) = 𝑛̇ 𝑖𝑛 ∙ ∫523.15 𝐶𝑃 ∙ 𝑑𝑇. The
gas is no longer an ideal gas (although seeing the value for Z still quite close to the ideal gas state),
we cannot put the ideal gas heat capacity in this equation. We can reformulate the energy balance,
as
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller reaganmakhanya. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for R83,00. You're not tied to anything after your purchase.
