Package deal
Industrial Maintenance Bundled Exams Questions and Answers Latest Versions (2024/2025) (Complete and Accurate)
Industrial Maintenance Bundled Exams Questions and Answers Latest Versions (2024/2025) (Complete and Accurate)
[Show more]Industrial Maintenance Bundled Exams Questions and Answers Latest Versions (2024/2025) (Complete and Accurate)
[Show more]Conventional Alignment Study Guide 
Questions with Verified Solutions 
 
When doing alignment what is aligned? Only the shaft center line is aligned 
 
What must be done before an alignment can be done? Coupling and shaft must be cleaned 
and Degreased. 
 
Before preforming an alignment what must an...
Preview 2 out of 5 pages
Add to cartConventional Alignment Study Guide 
Questions with Verified Solutions 
 
When doing alignment what is aligned? Only the shaft center line is aligned 
 
What must be done before an alignment can be done? Coupling and shaft must be cleaned 
and Degreased. 
 
Before preforming an alignment what must an...
Facility Maintenance Technician Exam 
Questions and Answers 100% Pass 
 
Once a repair is completed, technicians must ___. Carefully record the problem, causes, and 
solutions 
 
___ maintenance is scheduled work required to keep equipment in peak operating condition. 
Preventive 
 
___ maintenance ...
Preview 2 out of 8 pages
Add to cartFacility Maintenance Technician Exam 
Questions and Answers 100% Pass 
 
Once a repair is completed, technicians must ___. Carefully record the problem, causes, and 
solutions 
 
___ maintenance is scheduled work required to keep equipment in peak operating condition. 
Preventive 
 
___ maintenance ...
MSSC Maintenance Awareness Practice 
Test Questions with Verified Solutions 
 
A burn or pungent odor of oil indicates excessive temperature 
 
A Chain should be replaced when its length becomes ______longer than the original length. 
3 percent 
 
A common sign of a misaligned coupling is __________...
Preview 2 out of 15 pages
Add to cartMSSC Maintenance Awareness Practice 
Test Questions with Verified Solutions 
 
A burn or pungent odor of oil indicates excessive temperature 
 
A Chain should be replaced when its length becomes ______longer than the original length. 
3 percent 
 
A common sign of a misaligned coupling is __________...
Industrial Maintenance and 
Mechatronics CH-4-5 Tools and 
Fasteners 100% Correct 
 
SAE Society of Automotive Engineers 
 
metric system The decimal measuring system based on the meter, liter, and gram as units of 
length, capacity, and weight or mass. 
 
wrenches used to tighten or loosen nuts and...
Preview 1 out of 3 pages
Add to cartIndustrial Maintenance and 
Mechatronics CH-4-5 Tools and 
Fasteners 100% Correct 
 
SAE Society of Automotive Engineers 
 
metric system The decimal measuring system based on the meter, liter, and gram as units of 
length, capacity, and weight or mass. 
 
wrenches used to tighten or loosen nuts and...
Anchors and Fasteners (Industrial 
Maintenance) Questions and Answers 
 
Already Passed 
 
thread classes that provide a minimum degree of clearance are ______ 3A and 3B 
 
taper and spring pins are often used to _______ hold gears and pulleys on shafts 
 
the type of lock washer that provides the g...
Preview 1 out of 2 pages
Add to cartAnchors and Fasteners (Industrial 
Maintenance) Questions and Answers 
 
Already Passed 
 
thread classes that provide a minimum degree of clearance are ______ 3A and 3B 
 
taper and spring pins are often used to _______ hold gears and pulleys on shafts 
 
the type of lock washer that provides the g...
Industrial Maintenance Mechatronics 
Questions and Answers Already Passed 
 
What are 3 common causes of accidents in the workplace? Disobeying company rules, losing 
temper, taking chances, forgetting safety details, showing off, day dreaming, falling asleep 
 
What can happen if you knowingly viol...
Preview 2 out of 13 pages
Add to cartIndustrial Maintenance Mechatronics 
Questions and Answers Already Passed 
 
What are 3 common causes of accidents in the workplace? Disobeying company rules, losing 
temper, taking chances, forgetting safety details, showing off, day dreaming, falling asleep 
 
What can happen if you knowingly viol...
Industrial Maintenance Chapter 1 (3rd 
Edition) with Complete Solutions 
 
Lean Principles in Maintenance Movement 
Transportation 
Overproduction 
Waiting 
Inventory 
Defects 
Extra Processing 
 
Energy Audit A comprehensive review of a facility's energy use and a report on ways to 
reduce the ene...
Preview 2 out of 7 pages
Add to cartIndustrial Maintenance Chapter 1 (3rd 
Edition) with Complete Solutions 
 
Lean Principles in Maintenance Movement 
Transportation 
Overproduction 
Waiting 
Inventory 
Defects 
Extra Processing 
 
Energy Audit A comprehensive review of a facility's energy use and a report on ways to 
reduce the ene...
Industrial Maintenance Final Exam 
Review with Complete Solutions 
 
____ current is current that reverses its direction of flow at regular intervals. alternating 
 
____ is the amount of electrical pressure that causes electrons to move in a circuit. voltage 
 
Current is measured in ____. amperes ...
Preview 2 out of 10 pages
Add to cartIndustrial Maintenance Final Exam 
Review with Complete Solutions 
 
____ current is current that reverses its direction of flow at regular intervals. alternating 
 
____ is the amount of electrical pressure that causes electrons to move in a circuit. voltage 
 
Current is measured in ____. amperes ...
Industrial Maintenance Questions and 
 
Answers 100% Pass 
 
In an industrial facility, downtime due to equipment maintenance or breakdowns can be 
________. 
A. Used for team building exercise 
B. Irrelevant 
C. A way to save money 
D. Extremely costly D. Extremely costly 
 
When dealing with an an...
Preview 4 out of 35 pages
Add to cartIndustrial Maintenance Questions and 
 
Answers 100% Pass 
 
In an industrial facility, downtime due to equipment maintenance or breakdowns can be 
________. 
A. Used for team building exercise 
B. Irrelevant 
C. A way to save money 
D. Extremely costly D. Extremely costly 
 
When dealing with an an...
Industrial Maintenance Technician Test 
Questions and Answers Already Passed 
 
Which device do you use to measure voltage? Multi Meter 
 
If you were asked to check out the I/O card on a plc, which card would you look at? Input 
Card 
 
What does the term current refer to while dealing with electri...
Preview 2 out of 13 pages
Add to cartIndustrial Maintenance Technician Test 
Questions and Answers Already Passed 
 
Which device do you use to measure voltage? Multi Meter 
 
If you were asked to check out the I/O card on a plc, which card would you look at? Input 
Card 
 
What does the term current refer to while dealing with electri...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller StellarScores. Stuvia facilitates payment to the seller.
No, you only buy this summary for R363,40. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
84669 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy summaries for 14 years now