Robotics 1 Intelitek Questions and Correct Answers | Latest Update

Projection lines Shows relationships between lines Object lines Thick lines Center lines Long thin lines with short dashes between the segments Extension lines Narrow lines Break line The object is not fully represented in the blueprint Phantom line Master01 | October, 2024/2025 | La...

Stick This lubricant has a broad distribution over the surface of the thread Spray This lubricant wicks between finer threads Tube This lubricant has a tip controls quality over crest and root of thread Brush-on This lubricant has controlled distribution over the fasteners threads Gallin...

What type of robotic application is shown in the picture? Machine Loading The ____________ signal from the robot brain instructs the robot to do something. output Which of the following is not a component of a robotic system? Program The __________ step of the engineering design cycle all...

The knobby tire is shown at: (A is the normal tire connected to motors, B is a smooth small tire, C is a tire with bumps on it) C Which of the following is not a physical component of a robotic system? Program The __________ signal from the robot brain instructs the robot to do something. ...

All robots have the capabilities identified below. Which one must the robot perform first? Sensing An autonomous robot ____________. is controlled by an internal program and uses sensors to provide feedback Digital sensors _______________. can be only ON or OFF Given that the speed of s...

A block moving forward or backward along a straight line demonstrates what type of motion? Translational For picking up a non-ferromagnetic object with a smooth, flat surface, which of the following is the most appropriate end effector? Suction Cup. Given the task of picking up a basket, w...