how is a climb or descent initiated with the ap en
during climb out one of the pilots accidently mov
Written for
CBT
All documents for this subject (377)
Seller
Follow
Elitaa
Reviews received
Content preview
((((AUTOMATIC FLIGHT CONTROL SYSTEM)))) - Correct Answer-((((AUTOMATIC
FLIGHT CONTROL SYSTEM
How many yaw dampers must be operative/engaged in order to engage the autopilot? -
Correct Answer-One
How is a climb or descent initiated with the AP engaged? - Correct Answer-Select a
new preselect altitude, select desired vs mode, then adjust thrust as required??
During climb out, one of the pilots accidently moves both stab trim switches. The
autpilot will_____? - Correct Answer-Disconnect and aural will sound for 2 seconds
During a go-around, selecting either of the TOGA switches will____? - Correct Answer--
Arm lateral GA mode
-Arm vertical GA mode
-Disengage the AP
When the AP is automatically disengaged, the AP warning will sound until - Correct
Answer-the AP/SP switch is selected
The autopilot will automatically disconnect during windshear avoidance procedures and
the aural warning will sound for 2 seconds - Correct Answer-True
How can the FD be cleared from both PFDs? - Correct Answer-Selecting the onside FD
on the FCP screen
The aural C-Chord will sound ____ feet prior to a preselected altitude to advise pilots of
an impending level off - Correct Answer-1000ft
Overspeed protection is only provided when in which FD modes? - Correct Answer-VS
and Pitch
What is the minimum altitude that the autopilot can be engaged after takeoff? - Correct
Answer-600ft AGL
At what altitude must the autopilot be engaged? - Correct Answer-FL200
Which FD modes are prohibited during approach? - Correct Answer-IAS and DES
Approach mode can be used for a VOR approach.. - Correct Answer-False
When is the AP required to be disengaged while on a precision approach? - Correct
Answer-80ft AGL
When is the AP required to be disengaged while on a non-precision approach? -
Correct Answer-400ft AGL
, After passing the final approach point, the AP fails to disengage, the pilot ____. -
Correct Answer-can override the AP by assuming manual control
What components does the AP use to control the ailerons and elevators? - Correct
Answer-Two autopilot servomotors
During an overspeed condition when ALTS or ALT mode is active ____. - Correct
Answer-the pilot must manually reduce the speed
After selecting Heading mode, the two FCC status indicator lights illuminate. What do
the lights indicate? - Correct Answer-Selected mode has been acknowledged by each
FCC
Altitude deviations more than ___ feet, will be associated with an aural C-Chord and
amber flashing bug and altitude readout - Correct Answer-100ft
What is indicated by a white arrow pointing to the left of the PFD? - Correct Answer-FD1
is active and AP is not engaged
Both FDs are active for which modes? - Correct Answer--Takeoff mode (TOTO)
-Go-around mode (GAGA)
-Approach mode (APPR)
If your ACP isnt working or functioning properly, which switch will allow you to still utilize
the active COM and NAV frequencies? - Correct Answer-EMER
During total AC power loss, which communication equipment allows you to
communicate on Com 1? - Correct Answer-BTU
What is VHF 3 normally used for? - Correct Answer-ACARS or monitoring company
radio
Moving the transmit switch to VHF 2 will allow the pilot to ____. - Correct Answer-
Transmit and receive on VHF 2
Both RTU 1 and RTU 2 have failed, how can you tune VHF communication and
navigation frequencies? - Correct Answer-FMS Radio Tuning Page
The microphones between the pilot and FA are hot mikes when the CALL or EMER
switchlights are selected - Correct Answer-True
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Elitaa. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for R242,28. You're not tied to anything after your purchase.