Baseline dimensioning correct answers when each dimension originates from a common point, line, plane, or axis. The possibility of tolerance buildup arises when using baseline dimensioning is less likely to occur than to when using chain dimensioning.
Actual Mating Size correct answers is the sm...
IET 451 || A+ Verified Solutions.
Baseline dimensioning correct answers when each dimension originates from a common point,
line, plane, or axis. The possibility of tolerance buildup arises when using baseline dimensioning
is less likely to occur than to when using chain dimensioning.
Actual Mating Size correct answers is the smallest distance between two parallel planes within
which the actual surface features are contained.
Feature of size correct answers is a set of two opposed elements or opposed parallel planes
surfaces, each of which is associated with a size dimension.
Actual local size correct answers is any cross sectional measurement at any two adjacent points.
Nominal size correct answers is a dimension used for general identification such as stock size or
thread diameter.
Actual size correct answers is the term of a measured size of a part after manufacturing
Chain dimensioning correct answers is placing one after the other from one feature to the next
across the part.
I, O, Q. correct answers Any letters can be used for datum points except for
Specific Datum and Target Number correct answers are located in the lower half of a datum
target symbol.
A basic dimension correct answers is considered a theoretically perfect dimension.
The target area size correct answers is located in the top half of a datum target symbol
planes, points, lines, axis, or a combination thereof correct answers Datums are ...
Theoretical datum feature simulator: correct answers Perfect boundary used to establish a datum
from a specified datum feature.
Physical datum feature simulator: correct answers A physical boundary use to establish the
simulated datum from the specified datum feature.
six, three, three correct answers All parts have _______ degrees of freedom. _______
translational and ________ rotational.
degrees of freedom correct answers means the number of coordinates it takes to exclusively
control the position of a part.
, External Geometric Tolerance (MMC) correct answers MMC - Produced Size + Given
Geometric Tolerance
Internal Geometric Tolerance (MMC) correct answers Produced Size - MMC + Given Geometric
Tolerance
External Geometric Tolerance (LMC) correct answers Produced Size - LMC + Given .
Geometric Tolerance
Internal Geometric Tolerance (LMC) correct answers LMC - Produced Size + Given Geometric
Tolerance
MMB Internal correct answers MMC - Related Geometric Tolerance
MMB External correct answers MMC + Related Geometric Tolerance
Form tolerances correct answers _____________ specify a zone in which the dimensioned
feature, the features line elements, the features derived median plane, or the features derived
median line must be controlled.
straightness tolerance correct answers The _____________ specifies a zone within which the
required surface element or axis must lie.
TRUE correct answers Perfect form is required at MMC for surface straightness. TRUE OR
FALSE
TRUE correct answers Perfect form boundary can be violated during Axis straightness. TRUE
OR FALSE
flatness tolerance zone. correct answers The geometric tolerance that establishes the distance
between two parallel planes within which the surface must lie is a
Circularity Geometric Tolerance correct answers single cross sectional tolerance representing a
zone between two concentric circles.
Cylindricity Geometric tolerances correct answers covers both circular and longitudinal elements
at the same time representing a zone between two concentric circles.
Free state variation correct answers is the distortion of a part after removal of forces applied
during manufacturing.
Restrained condition correct answers is when a situation is necessary to restrain or hold a part on
its datum features to simulate the function or interaction with other features or parts, as in an
assembly.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller FullyFocus. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for R199,06. You're not tied to anything after your purchase.
