100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
88M Phase 1 Exam Questions and Answers R218,10   Add to cart

Exam (elaborations)

88M Phase 1 Exam Questions and Answers

 7 views  0 purchase
  • Course
  • 88m
  • Institution
  • 88m

88M Phase 1 Exam Questions and Answers

Preview 2 out of 11  pages

  • October 13, 2024
  • 11
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • 88m
  • 88m
avatar-seller
88M Phase 1 Exam Questions and
Answers

First Step of Coupling Procedures M915A5 - Answers -Perform 360 walk around
inspection placing chock block behind semi trailer wheels

Second Step of Coupling Procedures M915A5 - Answers -Ensure both primary and
secondary lock release handles are pulled out and lock guard is open, ensure fifth
wheel slide lock pin is in

Third Step of Coupling Procedures M915A5 - Answers -Ensure that fifth wheel ramps
are level with, or are slightly below, the angle of the pickup ramps

Fourth Step Coupling Procedures M915A5 - Answers -Slowly back tractor under semi
trailer kingpin plate. Stop when kingpin plate reaches back of fifth wheel. Semi Trailer
kingpin should be centered as closely as possible in throat of fifth wheel

Fifth Step of Coupling Procedures M915A5 - Answers -Ensure that semi trailers kingpin
plate is at the right height with the fifth wheel. If kingpin comes in too high, it will not
engage in fifth wheel correctly. Adjust semi trailer if needed

Sixth Step of Coupling Procedures M915A5 - Answers -Connect air hoses and light
cables, push semi trailer air supply control valve hand brake (Johnny Bar)

Seventh Step of Coupling Procedures M915A5 - Answers -If semi trailer is ABS
equipped, an ABS electrical cable must be used

Eighth Step of Coupling Procedures M915A5 - Answers -Back up slowly until fifth wheel
locks firmly to kingpin. A metallic click should be heard when the kingpin locks into fifth
wheel

Ninth Step of Coupling Procedures M915A5 - Answers -Check kingpin connection and
fifth wheel slide locks by pulling tractor forward and backward. When resistance is felt
select transmission shift selector Neutral pushbutton and set parking brake

Tenth Step of Coupling Procedures M915A5 - Answers -Verify that lock release handles
are in

Eleventh Step of Coupling Procedures M915A5 - Answers -Check semi trailer lights
which include turn signals

, Twelfth Step of Coupling Procedures M915A5 - Answers -Lift and secure semi trailer
landing gear and stow float pads

Thirteenth Step of Coupling Procedures M915A5 - Answers -Stow wheel blocks

First Step of Uncoupling Procedures M915A5 - Answers -Stop truck and semi trailer

Second Step of Uncoupling Procedures M915A5 - Answers -Shift transmission into
neutral

Third Step of Uncoupling Procedures M915A5 - Answers -Pull tractor and semi trailer
air supply valve OUT to apply the brakes

Fourth Step of Uncoupling Procedures M915A5 - Answers -Block wheels as required

Fifth Step of Uncoupling Procedures M915A5 - Answers -Place float pads under semi
trailer landing gear and lower landing gear until space between fifth wheel and trailer is
present

Seventh Step of Uncoupling Procedures M915A5 - Answers -Disconnect the IV
connectors on the trailer starting with the connector closest to you and progressing to
the ones furthest from you and stow semi trailer air supply lines and inter vehicular
cable

Eighth Step of Uncoupling Procedures M915A5 - Answers -If equipped with ABS,
disconnect and stow ABS electrical cable

Ninth Step of Uncoupling Procedures M915A5 - Answers -Pull secondary lock release
handle (2) out and lift to engage catch

Tenth Step of Uncoupling Procedures M915A5 - Answers -Pull primary lock release
handle (1) out

Eleventh Step of Uncoupling Procedures M915A5 - Answers -Release parking brake
and slowly pull forward, stop when semi trailer reaches the pick up ramps

Twelfth Step of Uncoupling Procedures M915A5 - Answers -Wait 5 seconds to ensure
landing gear will support semi trailer, then pull completely away from the trailer

First During PMCS Step for MTV - Answers -Controls and Indicators
Monitor all gages, warning lights, and warning buzzers during operation

Second During PMCS Step for MTV - Answers -Engine Operation
Check for excessive exhaust smoke, unusual engine noise, rough, or misfiring engine

Third During PMCS Step for MTV - Answers -CTIS

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying this summary from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller millyphilip. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy this summary for R218,10. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

83662 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy summaries for 14 years now

Start selling
R218,10
  • (0)
  Buy now