CSA Standard W47.1-09 - CWB Welding Supervisor study guide WXE1.1 CORRECT QUESTIONS & ANSWERS(RATED A+)
0 view 0 purchase
Course
CSA Standard W47.1-09 - CWB Welding Supervisor
Institution
CSA Standard W47.1-09 - CWB Welding Supervisor
Does the CSA Standard W47.1 specify the requirements for a company seeking certification? - ANSWERYes, This standard provides the requirements for the certification of companies engaged in the fusion welding of steel and the qualification of their personnel and welding procedures (Cl 1.1)
Who is...
CSA Standard W47.1-09 - CWB Welding
Supervisor study guide WXE1.1
CORRECT QUESTIONS &
ANSWERS(RATED A+)
Does the CSA Standard W47.1 specify the requirements for a company seeking
certification? - ANSWERYes, This standard provides the requirements for the
certification of companies engaged in the fusion welding of steel and the qualification
of their personnel and welding procedures (Cl 1.1)
Who is responsible for the welded products a company produces? - ANSWERThe
company (1.2) The requirements of this standard are based on the principle that a
certified company has full responsibility for the quality of the welded product it
produces and this responsibility cannot be transferred to its employed or retained
personnel or to the administrator of this standard.
Does this standard approve the products and services of a certified company? -
ANSWER(Cl. 1.3) This standard governs the certification of companies. Certification
pertains to the capability of the company with respect to welding. Certification should
not be construed as approving any products or services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - ANSWER(Cl. 1.4) This
standard stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA Standard
W47.1? - ANSWER(Cl. 2.1, 2.2) This standard refers to the following publications,
and where such reference is made, it shall be to the edition listed below, including all
amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural
quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
, A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel
Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic
Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering,
Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy
Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas
Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for
Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas
Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and Calibration
Laboratories.
What is the difference between "class" and "classification"? - ANSWER(Cl.3) Class -
a category of welder qualification, e.g., the flat (F), horizontal (H), vertical (V), or
overhead (O) welding positions.
Classification - refers to the various types of welding personnel e.g., T, S, FW, ASW
or WT
What are the welding personnel classifications specified in CSA standard W47.1? -
ANSWER(Cl.3) Classification - T, S, FW, ASW, or WT welding personnel as follows:
- "T" refers to a welder's and welding operator's ability to weld from one side without
backing and achieve complete penetration in the root pass, e.g., hollow section, pipe
and plate.
- "S" refers to a welder's and welding operator's ability to weld plates and rolled or
hollow sections for the full thickness of material, when welding from both sides with
backing, or for welding square groove welds from both sides, without backgouging,
within the thickness limitations of the accepted welding procedure data sheets for the
process used.
- "FW" refers to a welder's and welding operator's ability to deposit fillet welds and
tack welds.
- "ASW" refers to a welder's ability to deposit arc spot welds.
- "WT" refers to a welder's ability to deposit tack welds.
What is a Welding Procedure Data Sheet (WPDS)? - ANSWER(Cl.3) Welding
Procedure Data Sheet (WPDS) - a document, used in conjunction with a WPS,
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through EFT, credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying this summary from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller papersbyjol. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy this summary for R260,04. You're not tied to anything after your purchase.
