Fasteners - Study guides, Study notes & Summaries

Jeppesen Airframe Ch. 2 Section B (Sheet Metal Tools and Fasteners) Exam Latest Update...

FULL NHIE EXAM PRACTICE - Questions and Answers (Complete Solutions) Where you have found evidence of footing settlement, how can you predict whether there will be further settlement? (a) You can count the number of planes of movement. (b) You can determine the type of foundation material. (c) You cannot predict settlement from a single inspection. (d) You can determine the depth of the footing. You typically identify a Freon leak (a) As an oil stain (b) As refrigerant coming out of the Freon ...

IEC Dayton 1st Year Electrical Curriculum - - Lesson 102 - Tools and Fasteners

1. What type of non-threaded fastener used for joining without access from one side? a. A full rivet b. A dowel pin c. A tapered dowel pin d. A blind rivet - Answer- d. A blind rivet 2. A bolt requires to be tightened at 450 ft/lbs. Using a 1:5 torque ratio, what is the setting on the wrench? a. 80 b. 90 c. 45 d. 100 - Answer- b. 90 1 : 5 x : (450 ft/lbs)/5 x = 90 3. What is the purpose of a taper pin? a. Acts as a shear pin b. Approximate location of mating parts...

NCCER MILLWRIGHT PRACTICE EXAM 2 LATEST 2023 WITH COMPLETE SOLUTION @STUVATE- STUVIA On a pedestal grinder, the gap between the grinding wheel and work rest should not exceed: - 1/8 inch The kind of abrasive material used in grinding wheels for general purpose applications is: - aluminum oxide A blotter is used on a grinding wheel to: - protect the flanges from the abrasize grit, display information about the wheel and compensate for the uneven surfaces on the wheel Flanges should at l...

Woodshop Exam Fasteners Questions and Answers

When replacing steering or suspension parts, which precaution is needed to be performed? Fasteners tighten to factory specifications Most parts need to be replaced in pair (left and right side) The front wheels should be in the straight-ahead position when the final parts are tightened All of the above (Ans- All of the above A steering dampener looks like a ___________. Bump stop Shock absorber Pulley Straight long steel rod (Ans- shock absorberWear indicator ball joints indicate th...

Millwright-Fasteners Exam with Questions and Answers 1. What type of non-threaded fastener used for joining without access from one side? a. A full rivet b. A dowel pin c. A tapered dowel pin d. A blind rivet ANSWER d. A blind rivet 2. A bolt requires to be tightened at 450 ft/lbs. Using a 1:5 torque ratio, what is the setting on the wrench? a. 80 b. 90 c. 45 d. 100 ANSWER b. 90 1 : 5 x : (450 ft/lbs)/5 x = 90 3. What is the purpose of a taper pin? a. Acts as a s...

Woodshop Exam Fasteners Questions and Answers

Aviation Aircraft Maintenance and Repair (Airframe): Aircraft Structures Questions and Answers Already Passed What is the primary purpose of aircraft structural members? To support the loads imposed on the aircraft during flight and ground operations. What type of stress does a wing spar experience during flight? A combination of bending and shear stress. What is the purpose of stringers in an aircraft fuselage? To provide additional support and rigidity to the skin of the aircra...