Fasteners - Study guides, Study notes & Summaries

Control cable, rods and fasteners Questions And Answers Outline the construction, applications, installation procedures and precautions relating to the following classifications of cable A) Non flexible B) Flexible C) Extra-flexible D) Lockclad - ANS-A) made from 1x7 ( one strand of 7 wires) or from 1x19 (one strand of 19 wires) Normally used in applications where short cables are used that do not pass over pulleys and require little to no flexing Found on engine controls,...

Tooling U Fasteners Latest Updated Questions and Answers 2024/2025 What is an advantage of adhesive bonding? Adhesive bonding: Can join a wide range of materials. Which of the following would an assembler do on an ideal automated assembly line? Monitor operations Which assembly method uses nonmetallic materials such as pastes, glues, or tapes? Adhesive bonding What process typically must be performed on adherents before they can be joined by adhesive bonding? Priming What is a disad...

Tooling U Fasteners Exam Questions and Answers All Correct (1) What is an advantage of adhesive bonding? Adhesive bonding: - Answer-Can join a wide range of materials. Which of the following would an assembler do on an ideal automated assembly line? - Answer-Monitor operations Which assembly method uses nonmetallic materials such as pastes, glues, or tapes? - Answer-Adhesive bonding What process typically must be performed on adherents before they can be joined by adhesive bonding?...

What is an advantage of adhesive bonding? Adhesive bonding: - ANSWER-Can join a wide range of materials. Which of the following would an assembler do on an ideal automated assembly line? - ANSWER-Monitor operations Which assembly method uses nonmetallic materials such as pastes, glues, or tapes? - ANSWER-Adhesive bonding What process typically must be performed on adherents before they can be joined by adhesive bonding? - ANSWER-Priming What is a disadvantage of mechanical fastening?...

Anchors and Fasteners (Industrial Maintenance) Questions and Answers Already Passed thread classes that provide a minimum degree of clearance are ______ 3A and 3B taper and spring pins are often used to _______ hold gears and pulleys on shafts the type of lock washer that provides the greatest resistance is the ____ lock washer. external when fastening into concrete of questionable strength, it is best to use a _____ anchor. double-expansion cap screws are used when _____ a f...

Millwright – Fasteners: Questions With Answers

Which load and carry works best when advancing hoseline up and down a stairway? - Answer-Minute man Which of the following will cause the upper layer of hot smoke and fire gases to contract toward the ceiling? - Answer-Steam formed in the upper layer of hot fire gases A short fold or reverse bend made in hose during the loading process is called a: - Answer-Dutchman How should a single firefighter heel the ladder when performing a one-firefighter extension ladder raise? - Answer-Against th...

Industrial Maintenance and Mechatronics CH-4-5 Tools and Fasteners 100% Correct SAE Society of Automotive Engineers metric system The decimal measuring system based on the meter, liter, and gram as units of length, capacity, and weight or mass. wrenches used to tighten or loosen nuts and bolts. Sockets used to tighten or loosen nuts and bolts, comes in various size and a ratcheting handle. ratchet A device consisting of a bar or wheel with a set of angled teeth in which a pawl...

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

Stick  This lubricant has a broad distribution over the surface of the thread Spray  This lubricant wicks between finer threads Tube  This lubricant has a tip controls quality over crest and root of thread Brush-on  This lubricant has controlled distribution over the fasteners threads Galling  A material transferred from thread to thread unslotted button head  Which of the following descriptions is never a characteristic of a screw? more flexible  What benefit d...